Porto Lounge Chair - Sandstone
FLC225-SND-M
$3,500.00
All Prices Include GST | Limited Stock Available until Sold Out
In stock Shipped within 1-3 days of purchase.
In Stock
| 36-Month Structural Warranty. See Policy |
- Frame: Mocha Powdercoated Aluminium
- Seat and Back Cushions: Sunproof Sandstone
- Cushions Fill: Quick Dry Foam
- Luxury outdoor occasional chair with a sculptural, curved edges.
- Weather-resistant frame for durability and stability
- Designed for modern alfresco living, from residential to commercial spaces
- Supplied: Assembly Required
- Use: Suitable for Residential and Commercial, Outdoor
- Customisable: No
- Includes 1x Scatter Cushion upholstered in Sunproof Sandstone.
- Browse Porto Collection
- Outdoor Cover Available - Browse Here
Limited Stock Available until Sold Out
Download Product Specifications
Colours online may vary from actual due to screen settings and lighting conditions. Please contact us for a swatch, if required.
| SKU | FLC225-SND-M |
| Width | 1.040m |
| Depth | 1.080m |
| Height | 0.990m |
The Porto Lounge Chair invites a slower pace outdoors. Its solid teak frame grounds the design, while soft upholstery and a gentle profile create an easy sense of comfort. Complete with a matching scatter cushion, it offers relaxed seating that feels considered yet versatile. Pair it with the Porto Sofa or enjoy it as a standalone piece that elevates any outdoor setting.
OUTDOOR FABRICS
Sunbrella has a comprehensive stain removal guide that provides great advise on how to remove stains.
Limit Exposure to Direct Sunlight.
- Summer sunlight in Australia is extremely harsh. The sun’s UV rays will effect the colour of wood, leather and fabric. Whenever possible, we recommend that to minimise fabric fading you limit the amount of direct sunlight on your cushions. Darker fabrics tend to fade more than lighter fabrics. To ensure any fading is consistent across your cushions we recommend that you move and rotate cushions so all parts get equal exposure over time.
-
One of the best ways to keep outdoor fabrics looking good and to delay deep or vigorous cleanings is to properly maintain the fabrics. This can be accomplished by simply brushing off dirt before it becomes embedded in the fabrics, wiping up spills as soon as they occur or spot cleaning soon after stains occur. The following care instructions are recommended by Sunbrella and are a good guide for caring for your outdoor fabrics whether they are Sunbrella or our Factory Solution Dyed Acrylic Fabrics.
-
Our standard fabrics and (medium and hi density polyurethane) foam are best suited to outdoor undercover areas where the cushions may get some side spray from rain but will not be in direct rain. If cushions do get wet tilt them up on their sides to assist in drying. If the inner foam becomes soaked, remove the cushion cover and let the foam dry before putting cover back on.
-
If you want to leave your cushions out in the rain we recommend QuickDryFoam® foam inserts. QuickDryFoam® is exceptionally porous and permeable which allows maximum water drainage and air circulation, allowing quick use after being wet or even saturated. QuickDryFoam® uses UREGARD – in-bulit anti-microbial protection. It will prohibit the growth of common moulds and fungus inside your outdoor cushions even when left outdoors for a long period of time.
General or light cleaning:
-
Brush off any loose dirt.
-
Prepare a cleaning solution of (1/4 cup) mild soap per 4 litres of lukewarm water (less than 38°C).
-
Use a sponge or a soft bristle brush to clean.
-
Allow cleaning solution to soak into fabric.
-
Rinse thoroughly to remove all soap residue.
-
Allow fabric to air dry.
Spot cleaning:
-
Hand washing (For removable covers)
-
Machine washing (For removable covers)
Machine wash in cold water on a mild cycle (less than 38°C). Depending on wash load size, use normal amounts of mild laundry soap and add (1 cup) of bleach. Allow fabric to air dry.
-
Heavy cleaning for stubborn stains and mildew
Mildew may grow on dirt and other foreign substances that are not removed from the fabric. To clean mildew, or other stubborn stains:
-
Re-treating the fabric for ease of cleaning
Outdoor fabrics have a special finish that enhances water repellence. The finish is designed to last for several years of normal use, but may be refreshed after a thorough cleaning or extended use.There are many commercial Fabric guards available on the market (always test before use) and follow manufacturer’s instructions.
-
Apply a light mist of mild soap and water using a spray bottle.
-
Work the solution into the stain by lightly scrubbing the area with a sponge or soft bristle brush.
-
Rinse thoroughly to remove all soap residue.
-
Blot excess moisture with a clean, soft towel or sponge.
-
Wet-vacuum or blot excess water.
-
Air dry, Repeat steps 3 and 4 until all soap residue is removed.
- Soak fabric in a solution of 1/4 cup mild soap per 4 litres of lukewarm water.
- Use a sponge or a soft bristle brush as necessary.
- Rinse thoroughly to remove all soap residue.
- Air dry.
- Prepare a solution of (1 cup) of bleach and (1/4 cup) of mild soap per 4 litres of clean water.
- Spray on entire area and allow to soak into the fabric for 15 minutes.
- Remove stain with a sponge, clean towel or very soft bristle brush.
- Rinse thoroughly to remove all soap residue.
- Allow fabric to air dry.
- If stain and/or mildew are severe, bleach quantities may be increased.
TEAK
Teak is the premium natural material for outdoor furniture. Teak is an extremely durable hardwood; it requires very little care to preserve its good looks and integrity over decades of use.Teak requires no special treatment or coating to extend its long life, however there are some choices for the care of its appearance. New teak furniture often has a slight surface sheen. This is from the oil naturally occurring in teak wood. This surface oil will be washed away after a short time outdoors. The oils and resins that remain inside give teak its lasting durability. Over time when left outdoors, teak furniture will naturally age to a handsome silver-gray. This gradual process usually takes from six to twelve months depending on local conditions. Water spots or other discolouration may occur early in the weathering process. Some small cracks may also develop in the wood surface. This is a natural weathering effect and will soon blend into the surrounding surface. The slight separation of the grain has no effect on the strength and longevity of the furniture. Teak will return to its original smooth feel after the initial weathering process.
Maintence:
- Cleaning with a soft bristle brush or Scotch Brite© pad and soapy water will help to return the surface to a smooth finish. Once the furniture has taken on a weathered surface, it is easily maintained by an annual cleaning with a soft bristled brush and soapy water to remove accumulated dirt. Most dirt and stains can be removed with soapy water and a brush. For tough stains and mildew add one part household bleach to two parts water in the soap solution. Rinse well with clean water after washing. Pressure washers are to be avoided as they can scour and roughen the wood surface.
-
There are many Commercial Teak Cleaners and Protectors available online - we recommend the Teakshield product which is readily available and easy to apply.
-
There are also many commercial Teak Oils and stains on the market if you prefer a darker finish. We advise against the use of paint, varnish or other similar finishes. These finishes tend to crack and flake from the surface and are not suited to this application.
-
To reduce the risk of damage, take some precautions: Use coasters and placemats for glasses, mugs and any hot items to prevent stains.
-
Note: We advise that all new teak furniture should be wiped down after unwrapping to remove any dust particles left from the production process- prior to placing your new cushions directly on the timber.
ALUMINIUM
Powder coated aluminium is both highly weather resistant and lightweight which is perfect for outdoor use. Satara’s outdoor range features strong 1.8mm Aluminium tube framing which is hi-density welded and reinforced providing added strength and longevity.
Maintenance:
-
Routinely clean so rust spots or dirt won’t build-up.
-
Cover/store your furniture during winter months or long periods of non-use to extend the life of your outdoor furniture.
-
When cleaning use a microfiber cloth or sponge, with water and mild soap. A simple wipe down will remove the cloudiness that forms when oxidisation forms on steel. Never use bleach or any chloride-based cleaners on your stainless steel.
-
Do not use abrasive scrubbers or cleaners for metal furniture, as they can scratch the surface and expose the metal to rust inducing moisture.
-
If rust or mold has begun to develop, using fine-grit sandpaper, sand the area lightly and apply rust proof touch up paint.
-
Remove oxidisation from aluminium furniture, using equal parts of white vinegar and water.
-
For aluminium furniture avoid using abrasive cleaners as it can remove the protective powder-coat/finish that most aluminium furniture will have.
-
When your metal furniture is not in use, we recommend tilting your furniture using wedges to prevent water from pooling.
If you have any further questions please don't hesitate to contact sales@satara.com.au or call (03) 9587 4469.
We Also Recommend
Others Also Bought
